User's Manual

Electronic Instrument Installation
A Connect to Remote window opens.
4. Select the following parameters:
• Connection Type: Direct
• Communications Port: Enter your computer's port number
• Baud Rate: Enter the baud rate that displayed in step 2.
5. Click OK.
If this is the initial connection to the remote, The Enter Station Name window opens.
6. Enter a name for the remote installation.
7. Click OK.
The Site ID 1 window opens when you are connecting to a remote ERT module with the factory default
setting (Site ID 1).
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 64
Proprietary and Confidential