User's Manual

Electronic Instrument Installation
100G Series Communications with the Eagle Research Corrector
Using Itron 100G series remote ERT modules with Eagle Research volume correctors require
Eagle Research Field Manager software configured with the parameters for your model of Eagle Research
corrector.
Important This information is subject to change without notice. Refer to the Eagle Research
MPplus product documentation to verify the most current information about programming and
configuring the corrector for use with the 100G series remote ERT module.
To change the MPplus 60291 database and Itron ERT module settings using Eagle Research
Field Manager
Important This information is subject to change without notice. Refer to the Eagle Research product
documentation to verify the most current information about programming and configuring the corrector
for use with the 100G series remote ERT module.
1. Open the Eagle Research Field Manager from the Start menu or the desktop shortcut.
2. Connect the communications cable from your computer into the MS connector on the side of the MPplus
corrector. After the MS connector is connected, take note of the baud rate displayed on the front of the
corrector.
3. Click Connect on the upper left corner of the Field Manager window.
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 63
Proprietary and Confidential