User's Manual

Rotary Meter Installation

To install the 100G series remote gas module cable

1. Insert the plug on the cable connected to the ERT module into the receptacle on the meter adapter plate.

2. Tighten the threaded collar on the plug onto the American Meter interface receptacle. Verify the

connection is hand-tight.

Programming the Remote ERT Module

Caution You must program the 100G series remote gas module before use.

Program the 100G, 100G DL, 100G DLN, and 100G DLT ERT modules using:

• An FC200SR handheld computer with Field Deployment Manager (FDM) software version 1.1 or higher

• A FC300 with SRead handheld computer with Field Deployment Manager (FDM) software version 1.1 or

higher or

• A 900MHz Belt Clip Radio with Field Deployment Manager (FDM) software version 1.1 or higher and a

customer-supplied laptop. The Belt Clip Radio connects to the user-supplied laptop using a USB cable or

Bluetooth.

The 100G DLS ERT modules support enhanced security with the Itron Security Manager. Enabling command

or enhanced security requires additional programming.

Program the 100G DLS ERT modules using:

• An FC200SR handheld computer with Field Deployment Manager (FDM) software version 3.3 or higher

• An FC300 with SRead handheld computer with Field Deployment Manager (FDM) software version 3.3

or higher or

• A 900MHz Belt Clip Radio with Field Deployment Manager (FDM) software version 3.3 or higher and a

customer-supplied laptop. The Belt Clip Radio connects to the user-supplied laptop using a USB cable or

Bluetooth.

TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 38

Proprietary and Confidential