User's Manual

Rotary Meter Installation
Romet ECM2/100G Series Gas ERT Module Mounting Option
This mounting procedure requires the Romet ECM2/ERT Mounting Kit (Romet part number 34-444-1-KIT).
To mount the 100G series remote gas module on the Romet ECM2 meter
1. Remove the module screw from the back of the ECM2 meter and discard.
2. Insert the mounting screw fitted with the three lock washers. Two lock washers are used as spacers as
shown.
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 33
Proprietary and Confidential