User's Manual

Mounting the 100G Series Gas ERT Module
If the pipe is a 45 degree angle up to the right, install the adapter plate as shown below.
Typical module mounting Mounted adapter plate
If the pipe is a 45 degree angle up to the left, install the adapter plate as shown below.
Typical module mounting Mounted adapter plate
If the pipe is horizontal, install the adapter plate as shown below.
Typical module mounting Mounted adapter plate
To mount the adapter plate on the pipe bracket
Caution Vertical mounting position is important to maximize RF performance. Mount the 100G series
remote gas module with the module label arrow pointing up. The module's arrow must never point to
either side or upside down. The module tilt tamper functionality is designed to operate with the module
installed vertically.
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 12
Proprietary and Confidential