User's Manual

DATTUS Meter Installation
To wire the 100G series remote gas module to the DATTUS III meter
Pulse Output Cable Pin Descriptions
Function Pulse Output Cable Wire color ERT module wire color
Output +
White White
Cut cable
Blue Blue
Ground -
Pink Red
Mounting the 100G Series Gas ERT Module Connected to the DATTUS
Meter
You can mount the 100G series remote gas module on a pipe or vertical flat surface (wall). Mounting requires
the Itron Pipe Mount Kit (Itron part number CFG-0005-003). For mounting instructions, see Mounting the
100G series remote gas module on page 9.
Programming the Remote ERT Module
Caution You must program the 100G series remote gas module before use.
Program the 100G, 100G DL, 100G DLN, and 100G DLT ERT modules using:
• An FC200SR handheld computer with Field Deployment Manager (FDM) software version 1.1 or higher
or
• A FC300 with SRead handheld computer with Field Deployment Manager (FDM) software version 1.1 or
higher or
• A 900MHz Belt Clip Radio with Field Deployment Manager (FDM) software version 1.1 or higher and a
customer-supplied laptop. The Belt Clip Radio connects to the user-supplied laptop using a USB cable or
Bluetooth.
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 91
Proprietary and Confidential