User's Manual

Sensus Sonix Meter Installation
Connecting the Remote ERT Module to a Sensus Sonix 600 or
880 Meter
The 100G series remote gas module provides RF-based data collection for the Sonix 600 or 880 meter.
To wire the 100G DLT remote gas ERT module to Sonix 600 and 880 meters
• Connect the Sonix 600 or 880 meter to the 100G series remote gas module following the wiring diagram
below.
Programming the Remote ERT Module
Caution You must program the 100G series remote gas module before use.
Program the 100G, 100G DL, 100G DLN, and 100G DLT ERT modules using:
• An FC200SR handheld computer with Field Deployment Manager (FDM) software version 1.1 or higher
or
• A FC300 with SRead handheld computer with Field Deployment Manager (FDM) software version 1.1 or
higher or
• A 900MHz Belt Clip Radio with Field Deployment Manager (FDM) software version 1.1 or higher and a
customer-supplied laptop. The Belt Clip Radio connects to the user-supplied laptop using a USB cable or
Bluetooth.
TDC-0824-014 100G Series Gas ERT Module Installation Guide, Remote Mount 96
Proprietary and Confidential