User's Manual

Electronic Volume Corrector and Instrument Installation
TDC-0824-003 100G Datalogging FN ERT Module Installation Guide - Remote Mount 34
Proprietary and Confidential
Installation Prerequisites
100G Datalogging FN remote ERT module installation to a volume corrector or instrument requires:
100G Datalogging FN remote ERT module compatible to a volume corrector or instrument (see the 100G
Datalogging FN Remote ERT Module Meter Compatibility List on page 3).
Volume corrector or instrument compatible with the remote ERT module.
Proper tools and devices for installation and programming (see Installation Prerequisites on page 5).
Installation Overview
Installing the 100G Datalogging FN remote ERT module to a volume corrector or instrument involves five
tasks:
1. Programming the Mercury Instrument (see Programming the Mercury Instrument on page 34 or reference
the Mercury Instrument Programming Guide for more information).
2. Installing Mercury retrofit parts (if necessary).
3. Attaching the Datalogging FN remote ERT module to a pipe or vertical flat surface (wall) (see Mounting
the 100G Datalogging FN Remote ERT Module).
4. Connecting the Datalogging FN remote ERT module on page 6 to the Mercury Instrument Volume
Corrector (see To wire the ERT Module to the Mercury Instrument on page 37), Mercury Instrument
Temperature Compensating Index (TCI), or Dresser ROOTS Micro Corrector (IMC/W2 or MC2).
5. Programming the Datalogging FN remote ERT module (see Programming the 100G Datalogging FN
Remote ERT Module on page 30).