User's Manual

Mounting the 100G Datalogging FN Remote ERT Module
TDC-0824-003 100G Datalogging FN ERT Module Installation Guide - Remote Mount 12
Proprietary and Confidential
Adapter Plate Mounting Positions
The following pictures show adapter plates mounted on horizontal or 45-degree angle pipes.
Caution Regardless of the pipe's direction, the adapter plate mounting lug must always be at
the top.
If the pipe is a 45 degree angle up to the right, install the adapter plate as shown below.
Typical module mounting Mounted adapter plate
If the pipe is a 45 degree angle up to the left, install the adapter plate as shown below.
Typical module mounting Mounted adapter plate
If the pipe is horizontal, install the adapter plate as shown below.
Typical module mounting Mounted adapter plate