User's Manual

TDC-0824-003 100G Datalogging FN ERT Module Installation Guide - Remote Mount 6
Proprietary and Confidential
This chapter provides the instructions to mount the 100G Datalogging FN remote ERT module on a pipe or
other flat vertical surface (wall).
Installation Options
Mount the 100G Datalogging FN remote ERT module using the Pipe Mount or Wall Mount (Flat Surface)
procedure.
Pipe Mount. Pipe mounting is used in conjunction with the Remote Mount Kit (Itron part number CFG-
0005-003). The pipe mount option places the ERT module on a pipe near the meter or instrument (not on a
wall surface). This option requires a meter manufacturer's cable to connect the ERT module to the meter
or instrument.
Flat Vertical (Wall) Mount. Installation using the wall mount option places the ERT module on a wall or
other vertical surface. A cable connects the ERT module to the meter or instrument.
Mounting Screw Specifications
Application
Itron Part
Number
Description
To mount adapter plates on
pipe brackets
575-9930-016
8-16 x 1/2-inch length, Type 8 slotted pan-head
tapping screw - corrosion-resistant steel
To mount remote ERT
modules on adapter plates
575-9930-032
8-16 x 1-inch Type 8, slotted pan-head tapping
screw, corrosion-resistant steel
To mount remote ERT
modules on sheet metal
surfaces (to mount ERT
modules to wood surfaces, a
comparable wood screw is
required)
SCR-0009-001
10-16 x 1 1/2-inch Type AB thread for sheet
metal, Phillips pan-head tapping screw,
corrosion-resistant steel
C H A P T E R 2
Mounting the 100G Datalogging FN Remote ERT Module