User's Manual

Diaphragm Meter Installation
TDC-0824-003 100G Datalogging FN ERT Module Installation Guide - Remote Mount 53
Proprietary and Confidential
Materials Available from Itron
The following items are required for each 100G Datalogging FN remote ERT module installation to a
diaphragm gas meter:
Itron Part Number
Description
ERG-5003-501
100G Datalogging FN Remote ERT Module
with 2.5' encoder cable
CFG-0081-001
Remote Mount Encoder Kit
A acetone applicator stick
B tamper seals
C cable ties
D mounting screws
E magnet hub spacer
F magnet hub
013-1723-112
Encoder Spacing Tool
(Use the Encoder Spacing Tool to ensure the
encoder mounts the correct distance from the
magnet hub on the meter index.)
Replacement Gaskets
The Itron replacement index cover gaskets shown below are thicker than standard gaskets and have a special
slot to accommodate the encoder cable. Gaskets are designed for Schlumberger/Sprague model 675 and 1000
commercial diaphragm meters. These gaskets may be incompatible on meters from other manufacturers;
alternate cable relief procedures may be necessary.
4-hole front cover gasket:
Itron part number
FAB-0014-003
2-hole front cover gasket:
Itron part number
FAB-0014-002
1-hole front cover gasket:
Itron part number
FAB-0014-001