User's Manual

DATTUS Meter Installation
TDC-0824-003 100G Datalogging FN ERT Module Installation Guide - Remote Mount 67
Proprietary and Confidential
2. Installing any necessary Itron retrofit parts. Itron offers installation kits and brackets for endpoint
mounting options (see Installing the Remote ERT Module to Itron DATTUS Meters on page 67 or Direct
Mounting the Remote ERT Module to the DATTUS Meter on page 68).
3. Mounting the 100G Datalogging FN remote ERT module directly on the meter. If direct-mounting is not
an option for your installation, the 100G Datalogging FN remote ERT module may be mounted on a pipe,
or flat surface (see Mounting the 100G Datalogging FN Remote ERT Module).
4. Connecting the 100G Datalogging FN remote ERT module to the DATTUS meter (see Connecting the
Remote ERT Module to a DATTUS Meter on page 69).
5. Programming the 100G Datalogging FN remote ERT module (see Programming the 100G Datalogging
FN Remote ERT Module on page 30).
Installing the Remote ERT Module to Itron DATTUS Meters
DATTUS meters provide a an electronic pulse output compatible with the 100G Datalogging FN remote ERT
module. The DATTUS meter may be wired to the ERT module using the pulse output cable or the module can
be directly mounted to the meter.
When ordering, customers can have the 100G Datalogging FN remote ERT modules drop shipped to Itron's
Owenton, Kentucky meter factory to have a factory-installed connector attached to the module's bare leads.
The connector directly fits the pulse output on the DATTUS meter.