User's Manual

Installation Prerequisites
100G Datalogging Installation Guide - Direct Mount 9
• Replacement screws - to mount the 100G Datalogging Gas Endpoint assembly
to the meter and the index to the endpoint housing:
Replacement Screws
Meter To mount the 100G
Datalogging Gas
Endpoint on the meter:
Itron Part
Number
To mount the index on the
100G Datalogging Gas
Endpoint housing:
Itron Part
Number
Elster American 1/4 - 20 x 5/8" slotted,
Fillister head
8 - 32 x 3/16" slotted, round
pan-head
Sensus/Rockwell 10 - 24 x 5/8" slotted
Fillister head
6 - 32 x 5/8" slotted, round
pan-head
Itron/Actaris 10 - 24 x 5/8" slotted
Fillister head
10 - 24 x 1/4" slotted, round
pan-head
National/Lancaster 10 - 24 x 3/4" Phillips flat-
head stainless steel
SCR-0014-004 6 - 19 x 3/8" thread-forming,
Phillips pan-head to mount
indexes with legs
6 - 19 x 3/8" thread-forming,
Phillips, Fillister head to
mount indexes with screw
holes
SCR-0015-001
SCR-0037-001
Commercial
Meter
To mount the 100G
Datalogging
Commercial endpoint
on the meter:
Itron Part
Number
To mount the index (and
index assembly, if
applicable) on the 100G
Datalogging Commercial
endpoint housing:
Itron Part
Number
Elster American 2A x 3.25" length, slotted
round-head drilled to accept
utility-approved wire seals
SCR-0062-001
(Elster American)
12 - 24 x 1/2" slotted, Fillister
head machine screws, drilled
to accept utility-approved wire
seals
Sensus/Rockwell 2A x 3.63" length, slotted
round-head drilled to accept
utility-approved wire seals
SCR-0062-002 2A x 2.94" length, slotted
round-head
SCR-0062-003