User's Manual

Chapter 3 Sensus/Rockwell Meter Installation
24 100G Datalogging Installation Guide - Direct Mount
3. After the drive gear is aligned with the wriggler gear, the mounting holes will line up.
4. Using the original index mounting screw or a replacement screw (if necessary), place
one 6 - 32 5/8" screw into the index's right mounting screw hole. Attach the screw to
the endpoint housing's right-index mounting post just enough to hold the screw and
the right end of the index in place. Install and tighten the left index mounting screw.
Tighten the right index mounting screw completely.