User's Manual

Itron/Sprague Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 39
Proprietary and Confidential
Securing Brass Meter Tags to Flat-faced Meters
Some older Sprague meters have metal index covers with brass meter tags attached (by screws or rivets) to
metal index covers.
Typically, brass meter tags have mounting (screw/rivet) holes on each end of the tag.
Mount brass meter tags using one of three Itron-approved methods.
To secure brass meter tags to flat-faced meters
1. Method 1 and 2: Carefully remove the brass meter tag from the meter index cover. Try not to damage the
meter tag mounting holes. The Sprague Adapter Plate has tag mounting holes in the lower left and right
corners. After attaching the 100G Datalogging gas endpoint assembly to the meter, secure the meter tag to
one of the holes with a utility-approved and provided security seal.