User's Manual

TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 80
Proprietary and Confidential
This chapter provides the instructions to mount 100G Datalogging gas endpoints (residential and commercial)
on Dresser ROOTS
®
Commercial Rotary Meters.
Some commercial AMR applications require a Dresser ROOTS
®
Rotary Meter with a residential 100G
Datalogging gas endpoint. Only Elster American version residential 100G Datalogging gas endpoints are
compatible with Dresser ROOTS
®
series rotary gas meters. This chapter provides the instructions to mount an
Elster American residential 100G Datalogging gas endpoint on Dresser ROOTS
®
AMR-ready Rotary
Commercial Meters. Installation requires an AMR adapter kit supplied by Dresser. Refer to the Meter
Compatibility List on page 2 for Dresser AMR adapter kit part numbers.
Installation Prerequisites
Materials Supplied By Itron
100G Datalogging gas endpoint
New tamper seals - if applicable
Materials Supplied by You
AMR-ready Dresser ROOTS
®
Rotary Meter
Adapter Kit from Dresser
Elster American Meter index if mounting to 5C15 or 8C15 Rotary Meter
Note Follow the Dresser Field Installation Instructions to modify the AMR-
ready Dresser ROOTS
®
Meter for 100G Datalogging gas endpoint installation.
Contact Dresser distributor or Dresser representative for installation instructions
specific to the required AMR adapter kit.
C H A P T E R 8
Dresser ROOTS
®
Commercial Rotary Meter Installation