User's Manual

Sensus/Rockwell Commercial Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 78
Proprietary and Confidential
4. Verify the bottom of the 100G Datalogging commercial gas endpoint and the top of the meter meet. The
endpoint housing must rest on top of the meter without gaps.
Warning Do not press down on the 100G Datalogging commercial gas
endpoint if a gap exists between the module and the meter. A gap may be
caused by misalignment of the module wriggler and meter wriggler's drive
teeth. Pushing down on the endpoint could damage the module wriggler or
meter drive teeth. To eliminate a gap, slowly turn the 100G Datalogging
commercial gas endpoint's upper wriggler back and forth until the module
wriggler aligns with the meter's drive teeth.
5. Align the index drive wriggler with the 100G Datalogging wriggler and mounting holes. Attach using two
SCR-0062-001 Itron mounting screws.