User's Manual

Sensus/Rockwell Commercial Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 77
Proprietary and Confidential
2. Tilt the 100G Datalogging commercial gas endpoint at an angle and turn the wriggler until the drive
notches line up with the meter wriggler's drive teeth.
3. Align the 100G Datalogging commercial gas module so the screw holes line up with the meter's top screw
holes. Carefully lower the module on the meter so the wriggler's bars line up with the meter drive dog.
Itron recommends installation with one bar inserted into the meter drive dog's u-shaped gear.
Warning The INLET label on the 100G Datalogging commercial gas module
must line up with the INLET label on the Rockwell meter case.