User's Manual

Sensus/Rockwell Commercial Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 75
Proprietary and Confidential
Mounting a 100G Datalogging Commercial Gas Endpoint on a
Rockwell 750 meter with an Aluminum BOX Direct Reading
(VDR)
Installing the 100G Datalogging commercial endpoint on a Sensus/Rockwell commercial meter with an
Aluminum Box Direct Reading (VDR) Index requires two Itron SCR-0062-001 mounting screws (see
Installation Prerequisites on page 7) - purchased separately.
To remove the index from the
1. Remove tamper seals and screws from the top of the Aluminum Box Direct Reading Index. Set the cover
and screws aside. You will use them later in the installation.