User's Manual

Sensus/Rockwell Commercial Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 73
Proprietary and Confidential
4. Align the 100G Datalogging commercial gas endpoint with the index mounting holes. Verify the index
drive dog intersects with the endpoint's wriggler. Install the endpoint mounting screws (SCR-0062-003 see
Installation Prerequisites on page 7 for screw information). Turn each screw 1/4 to 1/2 turn after it
contacts the index/endpoint assembly.
5. Install the index cover. For index covers with flat-surface screw holes, use screws (SCR-0062-002), flat
washers (WSH-0020-005), and cork washers (WSH-0032-001). For index covers with tamper seal cups,
use screws, (AS-568A-011, 5/16" ID x 7/16 OD) O-rings, and tamper seals.