User's Manual

TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 68
Proprietary and Confidential
This chapter provides instructions to install the 100G Datalogging commercial gas endpoint on a Commercial
Sensus/Rockwell diaphragm meter.
Removing the Index/ Index Assembly from the Meter
100G Datalogging commercial gas endpoints can be mounted on Sensus/Rockwell Commercial Meters in
various configurations. These instructions show the index assembly mounted without a mounting plate.
Note Sensus/Rockwell diaphragm commercial meters do not require an index assembly
mounting plate. Indexes can be mounted directly to the endpoint.
To remove the index/index assembly from the meter
1. Remove any tamper seals (or wire seals) from the index cover and remove the index cover mounting
screws. You will re-install it later in these instructions.
C H A P T E R 7
Sensus/Rockwell Commercial Meter Installation