User's Manual

Elster American and Itron Actaris Commercial Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 66
Proprietary and Confidential
5. Place the index cover over the index with the clear side covering the index dials for easy reading. Align
the holes in the index cover with the endpoint adapter plate mounting holes. Secure with the four
mounting screws from the adapter kit. Tighten the mounting screws in a diagonal alternating pattern.
Insert the first screw and tighten enough to hold the index in place.
Insert the second screw and tighten two to three turns.
Insert the third mounting screw and tighten two to three turns.
Insert the fourth mounting screw and tighten.
Tighten the first, third, and second screws. Turn each screw 1/4 to 1/2 turn after the screw contacts the
index cover. Tighten each index mounting screw evenly. If you have access to a torque-driver, tighten
mounting screws to 72-inch pounds.
6. Insert tamper seals in the tamper seal cups on the index cover and press into place with an 11/32 nut driver
or similar blunt tool.