User's Manual

100G Datalogging Gas Endpoint
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 2
Proprietary and Confidential
Specifications
Functional Specifications
Description
Power Source
100G
100G Datalogging
Two "A" cell lithium batteries
One "A" cell lithium battery
Tamper Detection
Tilt tamper and magnetic tamper
FCC Compliance
Part 15 certified
Industry Canada Compliance
RSS-210 certified
Intrinsically Safe per
UL Class I, Division 1, Groups C and D
Product Identification
Numeric and barcoded endpoint type and serial number
Construction Materials
Gray polycarbonate housing and back plate with encapsulated
electronics
Operational Specifications
Description
Operating Temperatures
-40° to 158° F (-40° to +70° C)
Operating Humidity
5 to 95 percent relative humidity
Program Frequency
908 MHz
Transmit Frequency
Spread spectrum 908 to 924 MHz ISM band
Data Integrity
Verified in every data message
Related Documents
Document Title
Document Part Number
Gas Endpoint Meter Compatibility List
PUB-0117-002
Gas Endpoint Ordering Guide
PUB-0117-001
100G Datalogging Specification Sheet
Publication 100941SP-XX
Endpoint Link® Programming Guide
TDC-0744
Meter Compatibility List
This table lists meters compatible with the 100G Datalogging gas endpoint. Due to continuous research,
product improvements, and enhancements, Itron reserves the right to change this list without notice.
Note On rare occasions the location of endpoint-to-meter mounting holes on older
diaphragm gas meters might not match up with the mounting holes on the 100G
Datalogging gas endpoint. This can prevent the 100G Datalogging gas endpoint from
properly mounting to the meter.