User's Manual

Sensus/Rockwell Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 22
Proprietary and Confidential
4. Using the original index mounting screw or a replacement screw (if necessary), place one 6 - 32 5/8"
screw into the index's right mounting screw hole. Attach the screw to the endpoint housing's right-index
mounting post just enough to hold the screw and the right end of the index in place. Install and tighten the
left index mounting screw. Tighten the right index mounting screw completely. Install and tighten index
mounting screws evenly.
5. Slide the endpoint cover over the index and housing. Verify the cover is installed correctly. The endpoint
label should be clearly visible and easily read.