User's Manual

TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 19
Proprietary and Confidential
This chapter provides the instructions to install the 100G Datalogging gas endpoint on a Sensus/Rockwell
Meter. These instructions apply to 11-tooth, 16-tooth, and 18-tooth Sensus 100G Datalogging gas endpoints.
Note Sensus meters are also known as Invensys, Equimeter, and Rockwell. For these
instructions, all meter types are referred to as Sensus meters.
100G Datalogging gas endpoint
Sensus 11-tooth
Sensus 16-tooth
Sensus 18-tooth
To remove the index from the meter
1. Remove the four index cover screws and the index cover from the Sensus meter. Alternate screw removal
following the numbered pattern as shown in the photo.
C H A P T E R 3
Sensus/Rockwell Meter Installation