User's Manual

Elster American Meter Installation
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 12
Proprietary and Confidential
To assemble the 100G Datalogging gas endpoint and index
1. Separate the 100G Datalogging gas endpoint housing from the cover by pulling the cover straight out from
the housing.
2. Set the endpoint cover aside where it will not be damaged or fill with rain, dirt or snow. The cover will be
used later in this installation procedure.
Note Elster American Meter indexes are available in different models:
Index wrigglers on one-foot meters with drive slots Index meters on two-foot meters with drive posts
An Elster American index with mounting screw holes An Elster American index with mounting slots