User's Manual

100G Datalogging Gas Endpoint
TDC-0823-005 100G Datalogging Installation Guide - Direct Mount 8
Proprietary and Confidential
Small putty knife - residential meters.
Meter seals, wire seal, and seal press - to protect the meter from tampering, if applicable.
11/32-inch nut driver or other blunt tool - to securely seat new tamper plugs over screw holes.
Itron programming device to program and check 100G Datalogging gas endpoint installation and
operation:
o FC200SR handheld computer with Endpoint-Link or Endpoint-Link Pro software version 5.3
or higher or
o FC300 with SRead with Endpoint-Link or Endpoint Link Pro version 5.5 or higher or
o 900 MHz Belt Clip Radio with Endpoint-Link version 5.5 or higher and a customer-supplied
laptop
Replacement screws - to mount the 100G Datalogging gas endpoint assembly to the meter and the
index to the endpoint housing:
Replacement Screws
Meter
To mount the 100G
Datalogging gas
endpoint on the meter:
Itron Part
Number
To mount the index on the
100G Datalogging gas
endpoint housing:
Itron Part
Number
Elster American
1/4 - 20 x 5/8" slotted, Fillister
head
8 - 32 x 3/16" slotted, Fillister
head
Sensus/Rockwell
10 - 24 x 5/8" slotted, Fillister
head
6 - 32 x 5/8" slotted, Fillister head
Itron/Sprague
10 - 24 x 5/8" slotted, Fillister
head
10 - 24 x 1/4" slotted, Fillister
head
National/Lancaster
10 - 24 x 3/4" Phillips, flat-
head, stainless steel
SCR-0014-004
10 - 24 x 3/8" thread-forming,
Phillips pan-head to mount
indexes with legs
6 - 19 x 3/8" thread-forming,
Phillips, Fillister head to mount
indexes with screw holes
SCR-0017-001
SCR-0037-001
Commercial
Meter
To mount the 100G
Datalogging commercial
endpoint on the meter:
Itron Part
Number
To mount the index (and
index assembly, if
applicable) on the 100G
Datalogging commercial
endpoint housing:
Itron Part
Number
Elster American
2A x 3.25" length, slotted
round-head drilled to accept
utility-approved wire seals
SCR-0062-001
12 - 24 x 1/2" slotted, Fillister
head machine screws, drilled to
accept utility-approved wire seals
Sensus/Rockwell
2A x 3.63" length, slotted
round-head drilled to accept
utility-approved wire seals
SCR-0062-002
2A x 2.94" length, slotted round-
head
SCR-0062-003
Sensus/Rockwell
For Aluminum Box Direct
Reading (VDR) index only