User's Manual

Installing the 100G ERT Module
Natural Gas Solutions 100G Installation Guide for Direct Mounting on Meters 63
There are two types of index mounting plates for American Commercial meters. One type is
made of plastic and has tamper seal cups. The other type is made of metal and has no
tamper seal cups.
Similarly, there are index covers with tamper seal cups and covers without tamper seal cups.
Installing the 100G ERT Module
There are four major steps to installing the 100G ERT Module on a meter:
Remove the index or index and cover mounting plate. In some cases you can remove
the mounting plate with the index and its cover still attached to the mounting plate.
Program the 100G ERT Module
Attach the 100G ERT Module to the meter.
NOTE Properly dispose of all unused screws, old index covers, gaskets, tamper
seals, and other left over materials. Do not leave any materials on customer
premises.