User's Manual

Chapter 5 National/Lancaster Meter Installation
56 Natural Gas Solutions 100G Installation Guide for Direct Mounting on Meters
If you are attaching the index to the 100G ERT Module using mounting legs, use Itron
SCR-0015-001 screws.
If you remove the two mounting legs and attach the index to the 100G ERT Module
backplate mounting posts, use Itron SCR-0037-001 screws.
To attach the index to the 100G ERT Module using the mounting legs
1. Get two new screws (part number SCR-0015-001) for attaching indexes to ERT
modules by their legs.
2. Install an index mounting screw in the left mounting hole and tighten the screw just
enough to hold it in place.