User's Manual

Chapter 6 American/Actaris Commercial Meter Installation
74 Natural Gas Solutions 100G Installation Guide for Direct Mounting on Meters
3. Turn the 100G ERT Module right side up and place it on the top of the commercial
meter.
4. Verify both the 100G ERT Module and meter drive dogs are lined correctly to
eliminate binding.
5. INLET lettering must be on the inlet side of the meter.
6. Place the adapter plate on top of the 100G ERT Module. The two small screw holes in
the adaptor plate must face the back of the meter.
7. Place the extension driver onto the 100G ERT Module wriggler.