User's Manual

Installing 100G ERT Module on Actaris
Natural Gas Solutions 100G Installation Guide for Direct Mounting on Meters 73
Installing 100G ERT Module on Actaris
The information in this section guides you through the installation of the 100G ERT Module
on Actaris 675A, 800A and 1000A meters. Installation requires an adapter kit (Actaris part
number 80005901 which must be ordered from Actaris) that contains:
One adapter plate
Four ERT mounting screws
Four screw bushings
One extension driver
To mount the index assembly to the adapter plate
1. Turn the 100G ERT Module upside down in your hand.
2. Use the other hand to place the four screw bushings into the 100G ERT Module's
screw holes. If the screw bushings become dislodged before final assembly, replace
them and repeat process.