User's Manual

Installing 100G ERT Module on Actaris
WARNING! Do not press down on the index cover if there is a gap. If
you do, you can damage the index wriggler or ERT module wriggler.
7. Turn each screw 1/4 to 1/2 turn after it contacts the cover.
8. Place new tamper or wire seals over or through the screw heads.
9. Press tamper seals into place with an 11/32 nut driver, or other blunt tool, or crimp the
seal if you are using wire seals.
Installing 100G ERT Module on Actaris
The information in this section guides you through the installation of the 100G ERT Module
on Actaris 675A, 800A and 1000A meters. The installation requires an adapter kit (Actaris
part number 80005901) which must be ordered from Actaris. The kit contains:
• One adapter plate
• Four ERT mounting screws
• Four screw bushings
Natural Gas Solutions 100G Installation Guide 69