User's Manual
Table Of Contents
- Foreword
- Important Safety Information
- Contents
- About this Document
- Related Publications
- Product Description
- Features
- Specifications
- Air Interface
- Product Functionality
- Contents
- Integration Goal and Objectives
- Customer Problem Isolation
- Wireline and Wireless Communications
- Design Tips for Serviceability
- Environmental Issues
- Regulatory Requirements
- Contents
- Power Supply
- Host Interface
- Power Management
- Antenna Systems
- Hardware Recommendations
- Battery Selection Criteria
- Contents
- Hardware Integration
- Application Software
- Final Assembly
- Installation
- Troubleshooting
- End User Problem Resolution
- Service Depot Repair
- Contents
- Accessories and Options
- Abbreviations and Acronyms
- Desense Overview
- Desense Measurement Techniques
- Preparing the Device Under Test
- Performance Goals
- Methods of Controlling Emissions
- Antenna
- Summary
- FLEX Application Protocol Licensing
- Licensing
July 23, 2002 1-3
CreataLink2 XT Hardware Integrator’s Guide Foreword
Important Safety Information
Damage Requiring Service
Do not attempt to perform service functions that are not described in the operating
instructions. Refer all such servicing to qualified service personnel.
Motorola, Inc. is not responsible for static damage to equipment not sold under the
Motorola logo.
FCC Compliance Statement
This product generates, uses and can radiate radio frequency (RF). If it is not
installed and used in accordance with the instruction manual, it can cause harmful
interference to radio communications. It has been tested and complies with the
limits for a Class B digital device, pursuant to Part 15 of the Federal Communica
-
tions Commission (FCC) code of federal regulations, which are designed to provide
reasonable protection against harmful interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment causes harmful interference to radio or television
reception, the user should try and correct the interference by one or more of the
following measures:
Reorient or relocate the receiving/transmitting antenna.
Increase the separation between the equipment and the CreataLink2 XT device.
Connect the equipment into an outlet on a circuit different from that to which the
CreataLink2 XT device is connected.
Interference must be corrected at the user’s expense. Consult the dealer or an
experienced radio/TV technician for help.