User's Manual
Table Of Contents
- Foreword
- Important Safety Information
- Contents
- About this Document
- Related Publications
- Product Description
- Features
- Specifications
- Air Interface
- Product Functionality
- Contents
- Integration Goal and Objectives
- Customer Problem Isolation
- Wireline and Wireless Communications
- Design Tips for Serviceability
- Environmental Issues
- Regulatory Requirements
- Contents
- Power Supply
- Host Interface
- Power Management
- Antenna Systems
- Hardware Recommendations
- Battery Selection Criteria
- Contents
- Hardware Integration
- Application Software
- Final Assembly
- Installation
- Troubleshooting
- End User Problem Resolution
- Service Depot Repair
- Contents
- Accessories and Options
- Abbreviations and Acronyms
- Desense Overview
- Desense Measurement Techniques
- Preparing the Device Under Test
- Performance Goals
- Methods of Controlling Emissions
- Antenna
- Summary
- FLEX Application Protocol Licensing
- Licensing
July 10, 2002 3-13
CreataLink2 XT Hardware Integrator’s Guide Integration Overview
Regulatory Requirements
• Test 2 (CFR 47, Part 24 and 90) proves that the data transceiver remains in its
allocated channel spacing when it transmits, and does not produce spikes or
splatter in other frequencies. SmartSynch, Inc. undergoes FCC testing with
the data transceiver integrated into a dummy OEM host to ensure
conformance with these requirements.
According to the equipment authorization rules (CFR 47, Part 2), SmartSynch, Inc.
is allowed to authorize a second party to integrate the CreataLink2 XT into another
product, provided that the CreataLink2 XT device is unmodified and used as
intended. It is your responsibility to determine whether or not the integrator’s
electronics are subject to further FCC equipment authorization. Consult an
appropriate regulatory consultant or agency to determine your exact circumstances.
Once this determination is made, make the appropriate implementation:
• Integrator’s electronics ARE NOT subject to FCC equipment authorization:
Display the CreataLink2 XT device FCC ID, "FCC ID: E9698109", on the
common enclosure that houses the CreataLink2 XT device and integrator’s
electronics. NOTE: Contact SmartSynch at www.smartsynch.com for the latest
FCC ID on current CreataLink2 XT hardware.
Or
• Integrator’s electronics ARE subject to FCC equipment authorization: Obtain
FCC approval for integrator’s electronics through all applicable FCC
requirements, in which case a unique FCC ID shall be assigned to the
electronics. Display the CreataLink2 XT device FCC ID, "FCC ID: E9698109"
and the integrator’s FCC ID on the common enclosure that houses the
CreataLink2 XT device and integrator’s electronics. NOTE: Contact
SmartSynch at www.smartsynch.com for the latest FCC ID on current
CreataLink2 XT hardware.