User's Manual

Table Of Contents
July 23, 2002 B-1
CreataLink2 XT Hardware Integrator’s Guide Appendix B
Desense Overview
Desense Overview
The CreataLink2 XT device is a board-level product. This discussion of desense is
included to ensure that integrators are aware of its effects.
This section details the following aspects of desense:
Desense Defined
Noise Sources
Receiver Susceptibilities
Measurement Techniques
Preparing the Device under Test
Performance Goals
Radio Performance Capabilities
FCC Part 15 Level Comparison
Determining Emission Level Goals
Prediction of Sources
Desense Scenarios
Methods of Controlling Emissions
Shielding Approach
Alternate EMI Reduction Methods
Antenna
Field Strengths from the Antenna
Antenna Interactions
Summary
Desense Defined
Receiver desensitization occurs when an unwanted signal is present in the receiver
at a frequency that causes interference (see Figure B-1). The sources can be difficult
to locate and difficult to correct. This noise desensitizes or lowers the sensitivity
threshold of the receiver.
BAppendix B