User's Manual
Table Of Contents
- Foreword
- Important Safety Information
- Contents
- About this Document
- Related Publications
- Product Description
- Features
- Specifications
- Air Interface
- Product Functionality
- Contents
- Integration Goal and Objectives
- Customer Problem Isolation
- Wireline and Wireless Communications
- Design Tips for Serviceability
- Environmental Issues
- Regulatory Requirements
- Contents
- Power Supply
- Host Interface
- Power Management
- Antenna Systems
- Hardware Recommendations
- Battery Selection Criteria
- Contents
- Hardware Integration
- Application Software
- Final Assembly
- Installation
- Troubleshooting
- End User Problem Resolution
- Service Depot Repair
- Contents
- Accessories and Options
- Abbreviations and Acronyms
- Desense Overview
- Desense Measurement Techniques
- Preparing the Device Under Test
- Performance Goals
- Methods of Controlling Emissions
- Antenna
- Summary
- FLEX Application Protocol Licensing
- Licensing
6-2 July 23, 2002
Parts Information CreataLink2 XT Hardware Integrator’s Guide
Accessories and Options
Connectors
Part numbers and specifications for mating connectors are listed in Table 6-3
and Table 6-4.
Table 6-3. 8 and 22-Pin Part Numbers and Specifications
Part Number Electrical Specifications
Molex P/N 87332-0806 Max rated @ 2A per contact
Molex P/N 87332-6022 Max rated @ 2A per contact
Table 6-4. 8 and 22-Pin Mating Connector Part Numbers
Part Number Electrical Specifications
Molex P/N 51110-0860
(Polarized 8-pin receptacle)
Max rated @ 2A with 26 AWG wire
Molex P/N 51110-2251
(Polarized 22-pin receptacle)