User's Manual

After the phone is connected to the wireless network, the status bar will display the Wi-Fi
icon, and displays the signal strength is roughly (number of strip lights up).
Unless you choose not to save the web, the next cell phone to connect to has previously had
connected the encryption of the wireless network, there is no need to input password again.
Wi-Fi network search for themselves, that is, cell phone does not need to perform additional
steps can be connected to a Wi-Fi network.
In addition, the mobile phone can also surf the Internet by GPRS. We currently the default
boot after the GPRS as the SIM card, user can choose manual, the specific position in
"Settings > > SIM card management" data connection, touch "data connection", close the
current SIM card data connection.
Bluetooth
Open the Bluetooth or set the phone to can be detected
Press home > menu, then touch Settings.
Touch Connected devices, Bluetooth check box, and then select to open the Bluetooth
function. Bluetooth is turned on. Touch pair new device will start scanning within the scope
of the Bluetooth device. All devices to find Bluetooth devices will be displayed in the list
below.
Paired and connected to the Bluetooth headset
Press home > menu, then touch Settings.
Touch connected devices, and then select the Bluetooth check box. Then your phone will start
scanning a Bluetooth device within the scope of, and will all find the equipment displayed in the
Bluetooth device list below.
Interrupt connection with Bluetooth headset
Press home > menu > Settings > connected devices
In the Bluetooth device list, touch or point a hands-free headset is connected. Long according to
choose matching "disconnected" and cancelled.
Mobile phone use the matters needing attention
Notice for the use of phone
Your phone is a product of superior design and craftsmanship and should be treated with care. The
following suggestions can help you comply with the terms of repair kits, to extend the life of
mobile phone.
1) Place the mobile phone and their parts and components out of reach of small children.
2) Keep the phone dry, rain, humidity and all types of liquids which contain minerals will
corrode electronic circuits.
3) Don’t touch the phone with wet hands when charging, it will cause electric shock or damage
the phone.
4) Avoid place the device in high temperature environment. Temperatures will shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
5) Avoid place the device in too low temperature environment. When the temperature rises, the