Use and Care Manual

1. If the batteries are old, they may need to be replaced.
2. If the remote sensor is dusty, wipe it with a cotton swab or soft, dry cloth.
6
The cleaner is always
wall-following
7
1. Check to see if anything is caught in the left or right wheel.
The cleaner is just
going in circles
8
1. Check to see if the Main Brush is stuck because of tangled hair or string.
2. Check to see if the dustbin is full and needs to be emptied.
The cleaner has stopped
and all indicator lights
are flashing
- 14 -
6. Troubleshooting Guide
1
No Problems Solutions
The cleaner is falling
down stairs
2
The cleaner does
not power on.
1. Check the sensors underneath the cleaner. If they appear dusty,
gently wipe them with a cotton swab or soft, dry cloth.
2. The sensors are less effective under very bright light or on very
dark floor surfaces.
1. Ensure that the power switch is in the "ON" position
2. Ensure that the battery is sufficiently charged
Tip: If you cleaner is still experiencing problems after following the above suggestions,
please contact iTouchless Customer Support.
3
The cleaner stops
suddenly during
cleaning.
4
5
The cleaner is not
recharging
The remote controller
is not working
1. Check to see if the cleaner is in Spot Cleaning or Timed Cleaning Mode.
2. Ensure that the battery is sufficiently charged.
1. Confirm that the power adapter is properly attached to a working outlet
and is properly attached to the cleaner.
2. If the battery appears damaged, contact Customer Support.
1. Ensure that nothing on the floor is blocking the cleaner, and that
nothing is tangled in the wheels.