User's Manual
CHANGING STRAP
REMOVING STRAP
INSERTING STRAP
To change your strap, just follow these simple
instruc�ons:
1. To remove the current strap from your iTouch Air
3 Smartwatch, turn the watch face down and note
the silver pins on the strap near the case (1a). With
yourger pull the pin to the le (1b) and gently
pull the strap away from the watch (1c). The strap
should easily come detached from the watch.
2. To insert your new strap to your iTouch Air 3
Smartwatch, line up the steady pin with the hole
on the base of the case (2a).
3. While carefully holding the strap in place, pull
the lever on the strap to retract the pin down (2b)
and posithe strap against the case to line up
the pin before r
eleasing the lever so the pin snaps
in place (2c).
4. Repeat these steps for the other strap.
CHANGING YOUR ITOUCH AIR 3 STRAPS
WARRANTY &
WATCH CARE
*SEE THE QUICK START GUIDE FOR
QUICK SETUP INSTRUCTIONS
SAFETY & SKIN CARE
We want to make sure that you’re
comfortable in your new iTouch
Air 3 Smartwatch. Here are a few
tips that should help:
Regularly clean your smartwatch with a
moist paper towel (please pat dry your
watch once complete)
Keep your wrist free of any dirt and oils
Keep your watch loose enough so that
your watch while it’s being worn (wearing
a watch too tight can cause skin irritation
due to sweat or other types of moisture)
After a workout, it’s advised to remove
your watch to allow your wrist, watch,
and yourself to take a breather
Adults with eczema or a skin condition
should consult a physician before
wearing the watch
Please wear with care!
WATCH CARE
Clean your band regularly, especially after
strenuous exercise. It is recommended to
rinse your band with water or wipe it with an
alcohol wipe. Do NOT use any kind of soap,
hand sanitizers, or household cleaners,
which could get trapped beneath the band
and irritate your skin.
It’s a good idea to set your watch aside
for 10-15 minutes after cleaning to ensure
that the device is fully free of any potential
irritants and completely dry.
For stains or buildup on your band, watch
screen or casing, wipe the affected area with
an alcohol wipe. Be sure to use a little force
while wiping. If affected area is on the band,
you can use warm water and a soft bristle
brush to remove the dirt, stain or build up.
To keep your device looking new, its recom
-
screen and band.
Your watch should always help you feel
great but if you experience any irritation or
skin abrasion, please remove the watch and
consult a doctor.