Instructions / Assembly

3. Assembly Instructions

Step 1:

Carefully position grill as shown.

Attach leg (6) to bottom of smoker

chamber body (1) using screws (I).

Repeat step for remaining 3 legs.

Step 2:

Mount side handle (2) to smoker Chamber body (1)

using screws (I). Repeat step for opposite side.

• BEFORE ASSEMBLY READ ALL INSTRUCTIONS CAREFULLY

• ASSEMBLE UNIT ON A CLEAN, FLAT SURFACE

• TOOL NEEDED: PHILLIPS HEAD SCREWDRIVER

m CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary.

2. Exploded View

1 Smoker Chamber Body 7 Smoker Door 12 Water Pan

2 Side Handle 8 Logo Plate 13 Wood Chip Box w/Lid

3 Door Latch 9 Temperature Gauge 14 Wood Chip Grate

4 Cooking Grate Support 10 Door Handle 15 Thermostat Control

5 Heating Element 11 Cooking Grate 16 Drip Tray

6 Leg

I 1/4-20xl/2 Phillips Hex Screw, Qty: 16

II M6x38 Phillips Hex Screw, Qty: 2

III Wing Nut (packed with temperature gauge), Qty: 1

DO NOT RETURN TO RETAILER

For Assembly Assistance, Missing or Damaged Parts

Call: 1-866-994-6390

III