User's Manual

----------------------------------------Operational Guide------------------------------------------
Turning On and Off
Power On: Press and hold the Power button [1] for 3 second. The Indicator [6] will then turn to
a slow blinking blue.
Power Off: Press and hold the Power button [1] for 3 seconds. Indicator [7] will light up red
and turn off.
Pairing to a New Bluetooth Device (Mobile phone / Laptop etc):
Important: Make sure that your Bluetooth device (mobile phone/Laptop) supports A2DP*
(Advance Audio Distribution Profile) before proceeding.
1. From OFF, press and hold the Power Button [1] for 6 seconds and you will see the Indicator
[6] turns to a rapid blinking blue (twice per second). This indicates that the BT AUDIO BAR is
now turn on and entered pairing mode successfully.
2. While the BT AUDIO BAR is in pairing mode, access the Bluetooth menu of your device. Turn
on the Bluetooth function then execute a Bluetooth search to look for the BT AUDIO BAR.
(Please refer to your handsets user manual for further instructions on how to connect a Bluetooth
device to your specific model).
4. When the device displays a list of found Bluetooth devices, please select the BT AUDIO BAR.
5. Once you select the BT AUDIO BAR from the found devices list, your device will request a
password/pin code, please enter 0000 then press OK.
6. Pairing is successful once the blue blinking of the Bluetooth Indicator [6] changes to steady
blue. The BT AUDIO BAR is now ready to use with your device.
7. After BT AUDIO BAR is connected to your device, you can control the music playing with the
buttons [1], [2], [3] for their respective functions.
Connecting BT AUDIO BAR to a previously paired device:
1. From OFF, press and hold the Power Button [1] for 3 seconds until you see indicator [6]
turns to slow blinking blue (once per second).
2. Release your finger and the BT AUDIO BAR will search for the previously paired devices
automatically.
3. Upon successful searching, your device (mobile phone / PC) will prompt you to accept
connection to the BT AUDIO BAR.
4. The Indicator [6] will turn to solid blue upon successful connection to your Bluetooth
device.
Connecting music players directly to the BT AUDIO BAR:
At the back of the BT AUDIO BAR is a Stereo Line In [5] which is used to directly connect music
players via the audio cable.
1. Plug the audio cable into the Stereo Line In [5] found on the back of the BT AUDIO BAR and
place the other end into the output of your music player.