User's Manual

Chapter 1 Basics
3
seconds to turn the reader on.
 It may take a moment for the reader to turn on
and load.
 Press and hold the Power button for 3 seconds
to select Power off, then it will a appear a
confirmation window, tap OK to turn off the
reader.
Charging the Reader
 You need to charge the reader prior to use it
for the first time or when battery power is low.
 Charge the reader using AC adapter with
output 5V, 1.2A.
 Charging through PC may not be able to fully
charge the reader due to the low output
charging current from PC USB port.
 Please turn the Reader to standby mode to
shorten the charging process.
 It will take about 6 hours to fully charger the
reader in standby mode (LCD off)
 When DC /USB power cable is connected to the
reader for charging, the reader will enter into
standby mode after remains idle for 60s. Press
the [Power] button to wake up the reader.