Instruction Manual

www.itmtools.com.au 5

SAFETY INSTRUCTIONS

PEDESTAL TYPE

WALL TYPE

1. If an electrical fault is detected or the power supply cord is damaged, the device must sent to

a licenced electrician for repair.

2. Guard against electric shock, avoid body contact with earthed or grounded surfaces eg. pipes,

air con, refrigerators etc. Never operate the device in rain or wet conditions, or if the tool has

been exposed to rain or wet conditions.

3. Power source; ensure that the power source to be used conforms to the power requirements

specified on the name plate. Ensure the power supply plug matches the outlet. Never modify

the plug or use adaptors.

4. Do not abuse the power cord. Never use the cord for carrying, pulling or unplugging the

device. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

5. Extension cord; when using an extension cord ensure sufficient thickness and rated capacity.

6. The ITM fan is suitable for cooling in factories, warehouses, workshops and industrial work

areas. It is not designed for domestic use.

Product dimensions

Part #

TPF30 TWF30

Ø 810mm 810mm

B - C 1070 - 1250mm -

D 660mm -