User's Manual

Setup

1. Connect your device using one of these three options:

• Using RCA cable (included): Connect the ⅛"

(3.5mm) plug into the AUX IN jack on the transmitter,

then the RCA plugs into the AUX OUT jacks on your

device.

• Using ⅛" (3.5mm) audio cable (included): Connect

one end to the AUX IN jack on the transmitter and

the other end into the ⅛" (3.5mm) phone jack on your

device.

• Using a TOSLINK cable (not included): Connect

one end to the OPTICAL IN jack on the transmitter,

then the other end into the OPTICAL OUT jack on

your device.

Note: If both OPTICAL IN and AUX IN devices are

connected at the same time, the AUX IN device takes

priority. Disconnect the AUX IN connection to use

OPTICAL IN device.

2. Connect the adapter into the DC IN jack on the

transmitter then plug the adapter into a wall outlet.