Product specifications

ManualsBrandsItech Manualscomputers & electronicsSolar Voice 908

User Guide

Bluetooth Headset

SolarVoice

908

6-7

9-11

13-14

14-15

16-17

Product Specifications

SolarVoice

908 Overview

Getting Started

Charging Your Headset

Indicator Light

Pairing Your Headset with a Bluetooth Mobile Phone

Solar Charging under Sunlight

Using Your Headset

Resetting Your Headset / Removing the Pairing History

Troubleshooting

Safety Information

Care and Maintenance

Declaration of Conformity

Contents

1. Solar Panel

• Provide infinity standby time

under direct sunlight

2. Multi-function Button (MFB)

• Power On / Off

• Pair with mobile phone

• Answer / End a call

3. Status Indicators

• Show Bluetooth status

• Show solar charging status

4. Volume Up & Down

• Adjust Volume Up & Down

• Reject / Transfer a call

5. Charging Socket

6. Built-in Microphone

7. Cradle for Desktop & Car-use

8. Ear Hook

9. In-earbud x 4 (S, M, L, XL)

SolarVoice

908 Overview

(fig.1)

Product Specifications

Bluetooth Specification: V2.1 + EDR Class 2

Bluetooth Profiles Supported:: Headset, Handsfree, A2DP

Range of Frequency: 2.4GHz spectrum

Nominal Charging Time: Within 3 hours

Talk Time*: Up to 5 hours

Music Playing Time*: Up to 5 hours

Standby Time*: Up to 140 hours

Dimensions: 54.5 (L) x 17 (W) x 11.3 (H) mm /

2.18(L) x 0.67(W) x 0.44(T) inch

Weight: 13.1 grams / 0.42 ounces

* may vary due to the user’s habit, different modes of operation, and mobile phone

settings.

Summary of content (5 pages)

PAGE 1
Contents Product Specifications SolarVoice 908 Overview Getting Started Charging Your Headset Indicator Light Pairing Your Headset with a Bluetooth Mobile Phone Solar Charging under Sunlight Using Your Headset Resetting Your Headset / Removing the Pairing History Troubleshooting Safety Information Care and Maintenance Declaration of Conformity TM SolarVoiceTM 908 User Guide Bluetooth Headset 3 4 5 5 6-7 7 8 9-11 12 13-14 14-15 16-17 18 2 SolarVoiceTM 908 Overview Product Specifications Bluetooth Speci
PAGE 2
Getting Started Indicator Light To use your SolarVoiceTM 908 Bluetooth headset (“headset”), please follow the steps below: 1. Ensure your headset is fully charged. 2. Pair your charged headset with a Bluetooth-enabled mobile phone. Status Indicator Charging Your Headset The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery.
PAGE 3
Using your headset Using your headset (cont’d) Function Button Beep Status indictor Function Button Beep POWER ON Press and hold the MFB for 2 seconds Short beep Flash blue light 3 times Voice Dialing* In standby mode, press VOL UP once Short beep When you turn on your headset for the first time, the headset proceeds into pairing mode, i.e. the status indicator flashes blue and red alternately, so that you can immediately pair it with your mobile phone.
PAGE 4
Troubleshooting Troubleshooting (cont’d) I can hear crackling noise. To receive the best audio quality, it is recommended to wear your headset on the same side of the body as your mobile phone. I can't hear anything in my headset. • Ensure the headset is turned on and is properly charged. • Ensure the headset is properly paired with the mobile phone.
PAGE 5
Care and Maintenance (cont’d) Declaration of Conformity Built-in Battery • Do not attempt to replace the headset’s battery as it is in-built and is not changeable. • Dispose of the battery according to local regulations. Do not dispose of the battery as household waste. • Charge the battery in accordance with the instructions supplied with this user guide. • Rechargeable battery will be eventually wear out after charged and discharged few hundreds of times depending on the use and usage conditions.