User Manual

1/25/2018 Foca Pro - ITEAD Wiki
https://www.itead.cc/wiki/Foca_Pro 3/3
Foca Pro adopts CP2102 chip instead of FT232RL chip on Foca board, thus we cannot use driver file in the driver
directory of Arduino IDE to install the driver.http://www.silabs.com/products/interface/usbtouart/Pages/usb-to-uart-
bridge.aspx
You can download CP2102 driver for different platforms including MAC version, Linux version and Windows version.
Once downloaded, plug in Foca Pro, search for CP2102 among the unknown devices, then click Upgrade Driver and
manually install. Point the driver position to the downloaded driver directory and then install, finally the corresponding
serial number can be found on IDE.
More details of installation instructions, you can refer to this
file:ftp://imall.iteadstudio.com/Mainboard/IM130615004_ITeaduino_Nano/DOC_Driver_Installation.pdf