Installation Guide

Iteaduino Nano Driver Installation Manual iteadstudio.com 2
nd
, July, 2013
2
Tech Support: [e-mail]
In the pop-up window, choose ‘Browse my computer for driver software’:
Select route of downloaded driver file location, tick ‘Include subfolders’, then click ‘next’:
Then the system will install the driver program automatically – during the process, a prompt window may be popped up
asking whether to trust the driver source or not, choose yes. After driver is installed, disconnect Iteaduino Nano. Then,
when it is connected again, the system will identify it as a COM interface, and you can find the corresponding COM
interface N.O. in hardware device manager and then choose the corresponding COM interface N.O. in Port of Arduino IDE,
then you can download programs.