User's Manual

K5 is inching/self-locking switches
: From left to right, there are 1, 2, 3, 4, correspondingly for channel 1 (CH1), channel 2
(CH2), channel 3 (CH3), channel 4 (CH4). Toggle the switch down (0), the corresponding channel enters into inching mode;
Toggle the switch up (1), the corresponding channel enters into self
Please note that if S6 is toggled to the right(0), y
K6 is used to set the delay time for inching mode
CH4. Toggle all switches down (0000), the inching time will delay for 4
delay for 0.25s.
Please refer to the delay time setting list below:
4. RF Remote Settings
Pairing with 433MHz RF Remote
Quickly press twice one of the switches below, then press one of the ABCD butt
RF Remote. If paired successfully, the button will lit up in red, and the corresponding status LED will blink in green for 4
times. You can press the button to turn on or turn off the related channel.
: From left to right, there are 1, 2, 3, 4, correspondingly for channel 1 (CH1), channel 2
(CH2), channel 3 (CH3), channel 4 (CH4). Toggle the switch down (0), the corresponding channel enters into inching mode;
Toggle the switch up (1), the corresponding channel enters into self
-locking mode.
Please note that if S6 is toggled to the right(0), y
our 4CH Pro is in interlock mode, its invalid to set K5.
K6 is used to set the delay time for inching mode
. From left to right there are 1, 2, 3, 4, correspondingly for CH1, CH2, CH3,
CH4. Toggle all switches down (0000), the inching time will delay for 4
s; Toggle all switches up (1111), the inching time will
Please refer to the delay time setting list below:
Quickly press twice one of the switches below, then press one of the ABCD butt
ons on your
RF Remote. If paired successfully, the button will lit up in red, and the corresponding status LED will blink in green for 4
times. You can press the button to turn on or turn off the related channel.
: From left to right, there are 1, 2, 3, 4, correspondingly for channel 1 (CH1), channel 2
(CH2), channel 3 (CH3), channel 4 (CH4). Toggle the switch down (0), the corresponding channel enters into inching mode;
. From left to right there are 1, 2, 3, 4, correspondingly for CH1, CH2, CH3,
s; Toggle all switches up (1111), the inching time will
ons on your
RF Remote. If paired successfully, the button will lit up in red, and the corresponding status LED will blink in green for 4