Owner manual

7.28
AUTO PRINT
There are 3 auto print options:
•
Off: Test results do not automatically print upon completion of sample
analysis. A printout may be obtained by pressing the
print button on the
Results screen.
•
Immediate: Test results and sample information entered during the test will
automatically print upon completion of sample analysis.
•
Delayed: Test results automatically print when the done button is pressed
from the Results screen.
1. Highlight the desired print format. Press
next.
SCREEN CONTRAST
Screen contrast can be set to different levels for optimal viewing in different
ambient light conditions. The first level provides the least contrast between
the background and characters; the last level provides the greatest contrast
between the background and characters. Screen contrast changes immediately
upon pressing the selected contrast setting.
1. Use the left (<) and right (>) arrows to select
the optimal contrast setting. Press
next.
VUELINK
VueLink is an optional module for the Philips/Agilent monitoring system that
allows IRMA TruPoint patient test results to be displayed on the
Philips/Agilent bedside monitor. There are two IRMA TruPoint VueLink
settings:
•
Off: The IRMA TruPoint VueLink option is disabled. IRMA TruPoint
cannot send test results to the patient bedside monitor, even if it is
physically connected to a VueLink module.
•
On: IRMA TruPoint results can be transferred to the patient bedside
monitoring system when connected to a VueLink module via the IRMA
TruPoint serial port.
1. Highlight the desired VueLink setting. Press
next.