Quick Start Guide

-The best area for motion detection is 5 feet to 25 feet (1.5 to 7.5 meters) from the camera.
2.5m
1.5m
7.5m
Battery
When using the camera for the first time, be sure to fully charge the battery.
Charge the battery
1. Make sure the battery is inserted into the camera.
2. Connect the camera to a power outlet using the power adapter (5V,2A).
A camera will be blinking red when being charged.
3. It usually takes about 5-6 hours to fully charge the battery. Once a camera is fully charged,
indicator light will be solid red.
Note: The app will notify you when it detects a low battery level.
2
Secure the magnetic mount with screws.
3
Attach the camera to the magnetic mount.
Insert the wall anchors and screws.
Then install the mount.
Note: Prolonged direct sunlight can heat the inside of your camera past its maximum operating
temperature of 122°F (50°C). Avoid directly sunlight where possible and only use your camera in
environments within its operating temperature range: -4°F to 122°F (-20°C to 50°C).
Flashing red light
The device is charging
Light Indications
Solid yellow light
The device is powered on and initializing
Flashing yellow & blue lights
The device is pairing with the base station
Solid blue light
The device is working properly
Flashing blue light
The device is connecting to the network
Solid red light
The device is fully charged
No indicator light
The device is powered o or sleeping
Solid purple light
Something went wrong with the firmware
Flashing purple light
The device is upgrading